Table of Contents
Advertisement
The ULTRA WASH
®
Soil Removal System gives you sparkling
clean dishes, while using less energy and time. The ULTRA
®
WASH
Soil Removal System includes:
A Triple Action Filtration system that intermittently filters soil
from the wash water, thus eliminating the need to scrape
dishes.
smartwash
How the
™ cycle works
smartwash
When the
™ cycle is selected, it saves energy and
water by adjusting the wash cycle as needed.
Sensors detect the size of the dish load, the soil level, and the
water temperature in the dishwasher.
Sensors automatically adjust the temperature and the
amount of water used for the load.
This dishwasher will automatically calibrate the sensor
approximately once a year to your water quality.
IMPORTANT: The very first wash cycle after installation in your
home will be adjusted to include an additional 2 rinses for optical
soil sensor calibration. For proper calibration, the first cycle
should not be interrupted. If this calibration cycle is canceled or
stopped before the Clean light comes on at the end of the cycle,
the next wash cycle will repeat this sensor calibration.
The S
T
™ controls contain state of the art touch
MART
OUCH
technology.
The S
T
™ surface allows for easy cleaning
MART
OUCH
S
T
™ controls operate by sensing the presence of
MART
OUCH
your finger.
ULTRA WASH
smartwash
Featuring
™ cycle and T
Featuring S
A
®
Soil Removal System
An ULTRA WASH
and detergent quantity appearing in the wash water and
adjusts the cycles as needed.
An Automatic Temperature Control (ATC) that ensures the
proper water temperature for the selected wash cycle, dish
load size, and soil level of the load.
Z
URBO
ONE
How the T
URBO
When the T
URBO
concentrated wash to a specific zone in the back of the lower
dishrack for large, hard-to-clean dishes.
4 rotating spray jets on the T
periodically activated at the back of the tub throughout the
wash cycle.
Intensified cleaning is provided only to this specific wash
area, allowing you to gently clean the rest of the dish load.
T
™ Controls
MART
OUCH
Starting your dishwasher is easy. (See illustration below.)
A. Select a cycle by lightly touching the recessed cycle
selection area.
B. Select the option by lightly touching the recessed button
area.
C. Start the dishwasher by lightly touching the recessed
Start/Resume button.
C
®
optical soil sensor that detects soil level
™ wash option
Z
™ wash option works
ONE
Z
™ option is selected, it provides a
ONE
Z
™ manifold are
URBO
ONE
B
7
Hide quick links:
Advertisement
Table of Contents
