Loading Bottom Rack - Kenmore 665.1378 Use And Care Manual

3. Move the tines to the left to make room for larger dishes.
Move the tines to the right to wedge plastic or other
lightweight items against the side of the rack.
The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 13" (33 cm) tall, fit in the bottom rack.
(See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
10 place setting
Do not load glasses, cups, or lightweight plastic items in the
bottom rack. Load small items in the bottom rack only if they
are secured in place.
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety
of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.
12 place setting
Load cookie sheets, cake pans, and other large items at the
sides and back. Loading such items in front can keep the
water spray from reaching the detergent dispenser.
Secure heavily soiled cookware face down in the rack. If
using T Z ™ wash option, load cookware in
URBO ONE
T Z ™ wash area. (See "T
URBO ONE

Loading Bottom Rack

Z ™ wash area.")
URBO ONE
No-flip clips
The no-flip clips hold lightweight plastic items such as cups, lids,
or bowls in place during washing.
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
Make sure pot handles and other items do not stop rotation
of the spray arm(s). The spray arm(s) must move freely.
Do not load items between the bottom rack and the side of
the dishwasher tub because they might block the water inlet
opening.
T Z ™ wash area
URBO ONE
The T Z ™ wash area is located at the back of the lower
URBO ONE
dishrack.
NOTE: You must select the T
this wash feature. Do not face items toward the rear of the unit if
you are not using this wash option.
T Z
URBO
Load pans, casserole dishes, etc. in the back of the lower
dishrack with the soiled surfaces facing the T
spray jets. Make sure items do not interfere with the water
feed tube, spray arms, or T
Tip items toward the rear of the unit between the back two
rows of tines to maximize coverage.
IMPORTANT: Only one row of items may face the
T Z ™ spray jets. Load items so they do not interfere
URBO ONE
with the rotation of the T
overlapping, or nesting items will keep the T
spray jets from reaching all of the surfaces.
T Z
URBO ONE
Z ™ wash option to utilize
URBO ONE
™ wash area
ONE
Z
URBO
Z ™ spray jets.
URBO ONE
Z ™ spray jets. Stacking,
URBO ONE
Z
URBO ONE
™ wash area side view
™
ONE
™
11