Updating Video Settings - Polycom VVX 1500 User Manual

User Guide for the Polycom VVX 1500 Phone

Updating Video Settings

2 - 24
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
The following figure shows what the touch screen looks like when the
far-site stops or disables video.
Your system administrator can configure your phone so that your phone cannot
Note
transmit and receive video at all, even on a call-by-call basis.
Video settings allow you to update:
• Video Call Settings—to enable or disable near-site video at the start of all
calls, and to choose to display incoming video calls on the full screen or in
the window in the center of the touch screen. See
Settings on page 2-25.
• Video Screen Mode—to change the way video appears in the window in
the center of the screen and on the full screen. See
Displays in the Window in the Center of the Screen and on the Full Screen
on page 2-28.
• Local Camera View—to view full screen video with or without the PIP,
and whether the PIP should display next to, or over, the full screen video.
See Updating the Way the PIP displays
• Camera Settings—to change the clarity of near-site video, including the
brightness, contrast, and sharpness. See
page 2-32.
Note When you adjust video settings, the changes will affect the next call.
Updating Video Call
Updating the Way Video
on page 2-29.
Updating Camera Settings on