Setting Up Your Phone; Adjusting The Stand - Polycom VVX 1500 User Manual

Setting Up Your Phone

Adjusting the Stand

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
To set up the phone, do the following:
1. Adjust the stand. See Adjusting the
2. Connect the ferrite clamps to the network cable (and to the optional
computer cable, if you are connecting a computer to your phone). See
Attaching Ferrite Clamps
3. Connect the phone to the network and a power source. See
Network and Power Sources
4. Connect phone components. See
Cord on page 1-8 and
5. Adjust the screen and camera. See
Adjusting the Camera
Your phone is shipped with the stand positioned flat against the phone. To use
the phone, adjust the stand so that the phone is in a more upright position.
You can adjust the stand to one of five positions. The lowest position is labeled
MIN, and the highest position is labelled MAX.
The following figure shows the MIN and MAX labels for the stand.
Getting Started with Your Phone
Stand, below.
on page 1-5.
on page 1-5.
Connecting the Handset and Handset
Connecting Optional Components
Adjusting the Screen
on page 1-13.
Connecting
on page 1-8.
on page 1-12 and
1 - 3