Starting Communications; Ending Communications - Symbol PDT 3100 Series Product Reference Manual

Press the first letter of a flow control option (None, Xon/Xoff, or RTS/CTS), or scroll
using <UpArrow> or <DownArrow> and press <ENTER> when the correct value
is displayed.
9. The terminal is ready to receive the program.

Starting Communications

1. The terminal displays:
2. Press <ENT> on the terminal.
3. Press <ENTER> on the host computer. SENDHEX begins transmitting the
program image. When communications are established, the terminal displays:
During program loading, the display shows the program segment address being
transferred (XXXX).
4. When the transmission is complete, the terminal displays:
A status of 0000 (all zeros) indicates a successful transfer. Other status values
indicate an error. These values are provided in
Status Codes.
If you received an error, press <Clear> on the terminal to return to the Command
Mode main menu.

Ending Communications

1. Press <Clear> on the terminal.
2. Power down the terminal.
3. Detach any cables connected to the terminal.
4. Reboot the terminal using the appropriate cold boot sequence described in
a Terminal
Comm Parameters
Start? <ENT>
Program loader
Receiving: XXXX
Program loader
Status 0000
on page 4-5.
Setting Up the Terminal
Appendix C, Communications
Booting
2-9