Connecting Host And Cradle - Symbol PDT 3100 Series Product Reference Manual

PDT 3100 Series Product Reference Guide
Note: For details on the SENDHEX command, refer to the Series 3000
Application Programmer's Manual.
Other software may be used in place of SENDHEX.

Connecting Host and Cradle

Power Supply Cord
Note: The procedure for connecting 1- and 4-slot cradles is the same.
1. Plug the RS-232 serial cable's connector into the cradle's communication port.
2. Connect the other connector to the host computer's serial (COM) port.
3. Connect the power supply cord's round plug to the power connector on the side of
the cradle (3165: power supply p/n 59915-00-00 for domestic use, 60507-00-00 for
international use; 3166: power supply p/n 60153-00-00 for domestic use and
60174-00-00 for international use).
4. Connect the power supply's AC plug to a standard electrical outlet.
2-4
Host Computer
Figure 2-1. Cradle Setup for 3100 Initialization
Serial Null Modem Cable
Power
Connector
Comm Port