Panasonic KX-FT502ML Operating Instructions Manual page 24

7. Programmable Features
Feature/Code
Sending documents
overseas
{#}{2}{3}
Sending a fax at a specific
time
{#}{2}{5}
Setting the Caller ID list to
print automatically
{#}{2}{6}
Setting the time
adjustment
{#}{3}{3}
24
Selection
If you cannot send a fax overseas even if the number is correct and the line
is connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{0} "OFF": Deactivates this feature.
{1} "NEXT FAX": This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
{2} "ERROR" (default): When the previous fax transmission fails and you
wish to re-send the document.
Note:
L This feature is not available for broadcast transmission.
L Calling charges may be higher than usual.
This feature allows you to take advantage of low-cost calling hours offered
by your telephone company. This feature can be set up to 24 hours in
advance of the desired time.
{0} "OFF" (default)
{1} "ON"
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to select the desired
resolution (page 16).
3. Press {Menu}.
4. Press {#}, then {2}{5}.
5. Rotate {Easy Dial} to select "ON".
6. Press {Set}.
7. Enter the fax number (page 17).
8. Press {Set}.
9. Enter the transmission start time.
L If you select 12-hour time entry when you set the date and time
(page 10), press {*} repeatedly to select "AM" or "PM".
L If you selected 24-hour time entry when you set the date and time
(page 10), the time is set using 24-hour time entry.
10. Press {Set}.
11. Press {Menu}.
L To cancel after programming, press {Stop} then {Set}.
{0} "OFF" (default): The Caller ID list will not be printed, but the unit will
keep a record of the information for the last 30 different callers.
{1} "ON": The Caller ID list will be printed automatically each time the unit
logs 30 different callers (page 13).
Using this feature, the unit's date and time setting will be automatically
adjusted when caller information is received.
{1} "AUTO": The date and time setting will be automatically adjusted.
{2} "MANUAL" (default): Deactivates this features.