Website Blocking - ActionTec GT701-WG User Manual

Actiontec 54 Mbps Wireless DSL Gateway User Manual
3. Click Add to enter the computer's IP address in the "Blocked IP Address List"
text box.
4. To remove blocked services, select the computer's IP address in the "Blocked
IP Address List" text box and click Remove.
Netmeeting
If a computer on the network uses Netmeeting, enable Netmeeting, by clicking the
circle next to "On" and entering the IP address of the computer. Click Next, then
click Save and Restart to apply the settings. If Netmeeting is not needed, click the
circle next to "Off."
☞
Note: Netmeeting is used for
the computer is configured for Unnumbered Mode and has a
Public
IP

Website Blocking

Selecting Website Blocking in the "Advanced Configuration" screen generates the
"Website Blocking" screen. This feature enables the Gateway to block Web sites to
all computers on the network. To block a Web site, enter the address of the Web
site in the "Website" text box and click Add. The blocked Web site address will be
displayed in the "Blocked Website List" text box, and will not be available to com-
puters on the network. To remove a blocked Web site, click on it in the "Blocked
Website List," then click Remove.
Address, Netmeeting does not have to be enabled.
/Private addressing only. If
NAT IP
78