ActionTec GT701-WG User Manual page 75

Actiontec 54 Mbps Wireless DSL Gateway User Manual
128-bit -bit
WEP - 128
hexadecimal digit consists of alphanumeric characters ranging from
An example of a
128
create a -bit
128 WEP
enter hexadecimal digit pairs in the Key text box. After activating
13
on the Gateway, a computer with wireless capability can join the network only if
this key is entered in the computer's wireless encryption scheme.
256-bit
-bit
WEP - 256
hexadecimal digit consists of alphanumeric characters ranging from
example of a -bit
256
FE-6C-A1-EF-2E-D3-C4-21-74-5D-B1-3E-FE-AE
Key 1 by clicking in the appropriate circle, then enter
in the Key text box. After activating
wireless capability can join the network only if this key is entered in the comput-
er's wireless encryption scheme.
☞
Note: Not all wireless
Ensure that all
support
128
WEP+802.1x
Activating WEP+802.1x and clicking Next in the Wireless Settings screen gener-
ates the "Wireless 802.1x Security Settings" screen. This setting is for enterprise
networks only, and should be accessed by experienced information systems spe-
cialists only.
To set up
WEP+802.1
"Server IP Address" text box, and the "Secret" key (for communication between
the server and the Router) in the "Secret" text box. The "Port" and
RADIUS
"Group Key Interval" values should remain the same
requires one key, comprising
WEP
-bit key is:
WEP 3D-44-FE-6C-A1-EF-2E-D3-C4-21-74-5D-B1
key, activate Key 1 by clicking in the appropriate circle, then
requires one key, comprising
WEP
key is:
WEP 3D-44-FE-6C-A1-EF-2E-D3-C4-21-74-5D-B1-3D-44-
256
Cards support
PC
Cards installed in the networked computers
PC
- or -bit before activating.
256 WEP
x security, enter the
13
29
. To create a
hexadecimal digit pairs
29
-bit on the Gateway, a computer with
WEP
- or
128 256
address of the
IP
72
hexadecimal pairs. A
or
0-9 A-F
-bit
128 WEP
hexadecimal pairs. A
or
0-9 A-F
-bit key, activate
256 WEP
-bit .
WEP
server in the
RADIUS
.
. To
. An