ActionTec GT701-WG User Manual page 58

5. Scroll down to the IP Configuration section on the existing page, click on the
circle next to "Static," and enter the IP address obtained from the
sheet in the IP text box.
☞
Note: The "Subnet" and "Gateway" text boxes are not used dur-
ing this procedure.
6. If provided with
"Static" and enter the DNS addresses in the "
the bottom of the Actiontec
If no settings were provided, go to step
DNS
7. Click "Save and Restart" at the bottom of the screen.
Chapter 5 Setting Up Static IP
settings on the
DNS
Modem Setup Page screen.
DSL
55
worksheet, click the circle next to
ISP
Configuration" section at
DNS
.
7
work-
ISP