ZyXEL Communications ZyWall 10 Reference Manual page 27

2.
Click Network in the icon bar.
- Select Automatic from the Location list.
- Select Built-in Ethernet from the Show list.
- Click the TCP/IP tab.
3.
For dynamically assigned settings, select Using DHCP from the Configure list.
4. For statically assigned settings, do the following:
-From the Configure box, select Manually.
-Type your IP address in the IP Address box.
-Type your subnet mask in the Subnet mask box.
-Type the IP address of your ZyWALL in the Router address box.
5. Click Apply Now and close the window.
6. Turn on your ZyWALL and restart your computer (if prompted).
Check your TCP/IP properties in the Network window.
Setting Up Your Computer's IP Address
Verifying Your Computer's IP Address
ZyWALL 10~100 Series Internet Security Gateway
1-11