Configuring Ospf Redistribution - ZyXEL Communications XGS-4728F User Manual

Table 100 IP Application > OSPF Configuration: Summary Table (continued)
LABEL
Stub
Network
Delete
Cancel

32.5 Configuring OSPF Redistribution

Use this screen to configure route redistribution and summary addresses. Route
redistribution is used when other routers which use RIP routing protocol and/or
static routes need to exchange routing information with the Switch using OSPF
routing protocol. A summary address is used to cover more than one routing
entries in order to reduce the routing table size.
In the OSPF Configuration screen, click Redistribute to display the OSPF
Redistribution screen.
Figure 152 IP Application > OSPF Configuration > Redistribute
The following table describes the labels in this screen.
Table 101 IP Application > OSPF Configuration > Redistribute
LABEL
Redistribute
Route
Active
XGS-4728F User's Guide
DESCRIPTION
This field displays whether an area is a stub network (Yes) or not (No).
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
DESCRIPTION
Route redistribution allows your Switch to import and translate external
routes learned through RIP routing protocol or configured manually
(Static) into the OSPF network transparently.
Select this option to activate route redistribution for routes learned through
the selected protocol.
Chapter 32 OSPF
281