Ospf Configuration - ZyXEL Communications XGS-4728F User Manual

Chapter 32 OSPF
Table 97 OSPF Status: Common Output Fields (continued)
FIELD
Seq #
Checksum
Link Count

32.3 OSPF Configuration

Use this screen to activate OSPF and set general settings. Click IP Application >
OSPF and the Configuration link to display the OSPF Configuration screen.
See Section 32.1 on page 273
Figure 149 IP Application > OSPF Configuration: Activating and General Settings
The follow table describes the related labels in this screen.
Table 98 IP Application > OSPF Configuration: Activating and General Settings
LABEL
Active
Router ID
Apply
Cancel
278
DESCRIPTION
This field displays the link sequence number of the LSA.
This field displays the checksum value of the LSA.
This field displays the number of links in the LSA.
for more information on OSPF.
DESCRIPTION
OSPF is disabled by default. Select this option to enable it.
Router ID uniquely identifies the Switch in an OSPF. Enter a unique ID (that
uses the format of an IP address in dotted decimal notation) for the Switch.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the Save
link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
XGS-4728F User's Guide