Table of Contents
Advertisement
•
PRESET: The speed dome will go to the selected preset at the specified time if you
select the time task as preset. The value ranges from 1 to 80.
•
SCAN: The speed dome will go to the selected scan at the specified time if you select the
time task as scan. The value ranges from 1 to 5.
•
TOUR: The speed dome will go to the selected preset at the specified time if you select
the time task as tour. The value ranges from 1 to 8.
•
PATTERN: The speed dome will go to the selected pattern at the specified time if you
select the time task as pattern. The value ranges from 1 to 5.
•
SAVE: After you completed the above setup, you need to move the cursor here and then
click confirm button to save current time setup.
•
BACK: Go back to the previous menu.
•
EXIT: Log out the system menu.
4.4.5
Alarm Setup
ALARM NO
ACTION
CONTACT
PRESET
AUTO SCAN
CRUISE
RELAY OUT
RESET DELAY
SAVE
BACK
EXIT
Move the cursor to highlight ALARM SETTING button and then click confirm button.
ALARM NO: Here is to set alarm input. Alarm input value ranges from 1 to 7. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
ACTION: Action on alarm function. It includes NONE/PRESET/AUTO SCAN/TOURING
functions. Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
CONTACT：You can set system activation operation once alarm occurred. There are two
alarm signal mode: normal open (N/O) and normal closed (N/C). Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
PRESET NO：Please use the left/right button on the keyboard or in the speed dome
terminal menu to set. The camera will turn to the specified preset to monitor after alarm
occurs.
AUTO SCAN：Please use the left/right button on the keyboard or in the speed dome
terminal menu to set. The camera will begin auto scan after alarm occurs.
CRUISE：Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
The camera will begin auto cruise when alarm occurs.
RELAY OUT: Here is to set relay alarm mode and reset time. There are several options:
off/1→5S/2→5S/1&2→5S.
：01
：NONE
：N/O
：001
：001
：001
：OFFS
：3S
33
Advertisement
Table of Contents
