User Guide MacePro True Day/Night IR ™ Vandal-Resistant Bullet Camera Thank you for purchasing a MacePro™ MPC-IRVB-0650 Camera. Please read the instructions completely before installation. Please consult a legal expert on the proper use of this equipment in accordance with the law. MPC-IRVB-0650...
FCC STATEMENT WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. * Federal Communications Commission (FCC) Statement WARNING This Equipment has been tested and found to comply with the limits for a Class B digital device,...
Page 3
FUNCTIONS The camera includes auto white balance mode (AWB) and color temperature. The range is 2400°K~9600°K SENSOR Auto Cell Device Sensor, the IR LED automatically turns on when exterior illumination drops below pre-set levels. IR LED will not activate when exterior illumination is above pre-set levels, to reduce power consumption.
POWER AND VIDEO OUTPUT JACK A center pin positive barrel connector is available for AC or DC voltage (12vdc or 24vac). A BNC connector provides an analog video output. INSTALLATION 1. Install the camera on the bracket and tighten screws. 2.