Table of Contents
Advertisement
Auto: It becomes valid after you set the exposure compensation, backlight
o
compensation (BLC), slow shutter, wide dynamic region (WDR).
Manual: It becomes valid after you set the gain setting, shutter, iris setting, wide
o
dynamic region (WDR).
AV: It becomes valid after you set the exposure setting, iris setting, wide
o
dynamic region (WDR).
TV: It becomes valid after you set the shutter setting, exposure compensation,
o
wide dynamic region (WDR).
GAIN SETTING: The value ranges from 1 to 16. Default value is 2. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
SHUTTER: You can set shutter speed here. The value ranges from 1/3 to 1/10000. Default
value is 1/50. Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
IRIS SETTING: The value ranges from 1 to 18. Default value is 11. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
EXPOSURE COM: The value ranges from 1 to 15. Default value is 8. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
SLOW AE; in the strong light environment, you can lower the camera exposure speed to
capture the image and enhance the definition. The value ranges from 1 to 16. The bigger the
value, the higher the exposure speed. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set. Please make sure your camera supports this
function.
SLOW SHUTTER: In lower illumination environment, you can lower the cameras auto
exposure time to capture the image and enhance the definition. Please note for the
moving object, the image trail phenomenon may occur. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
BLC: It is an abbreviation for back light compensation. System can compensate the object in
the dark light to achieve a clear video. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
WDR ENBALE: It is an abbreviation for wide dynamic region. Please make sure your
camera supports current function. This function can adjust the video brightness when the
contrast between the strong light and the dark light is too high. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.
BACK: Go back to previous menu.
EXIT: Log out system menu.
4.4.3.3 Day/Night Setting
Move the cursor to DAY/NIGHT SETTING and then click confirm button, you can go to the
submenu.
DAY/NIGHT: There are four options: auto/time/night/day. Please use the left/right button on
the keyboard or in the speed dome terminal menu to set.
DAY/NIGHT
DAY TIME
NIGHT TIME
SAVE
BACK
EXIT
：AUTO
：07H 00M
: 19H 00M
25
Advertisement
Table of Contents
