Rear Panel - Integra DTR-30.6 Basic Manual

1 2 3
G H

Rear Panel

RI REMOTE CONTROL jack: An Onkyo product with RI
1
jack can be connected and synchronized with this unit.
FM ANTENNA jack (75 Ω) and AM ANTENNA
2
terminal: The supplied antennas are connected.
COMPONENT VIDEO IN/OUT jacks: Component video
3
input/output jacks
ETHERNET port: Used for LAN connection
4
RS232 port: Connected to the home control system. (¼)
5
IR IN A/B/OUT jack: Connected to the multiroom
6
remote control kit. (¼)
12V TRIGGER OUT A/B/C jacks: Allows you to connect
7
a device with trigger input jack in a separate room to
enable power link operation between the device and the
unit. (¼)
¼ Special devices or cable connections are necessary to use the ¼
control functions 5 to 7. Contact the specialized stores for more
information.
4 5 6 7
I J
HDMI IN/OUT jacks: Digital video signals and audio
8
signals are transmitted between the unit and the
connected devices.
Wireless antenna: Used for Wi-Fi connection or when
9
using a Bluetooth-enabled device. Adjust their angles
according to the connection status.
AC INLET: The power cord is connected.
F
8 9
K L M
90°
180°
90°
180°
F
DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio
G
signals are input.
GND terminal: The ground wire of the turntable is
H
connected.
Composite video and analog audio jacks: Analog
I
video signals and audio signals are input.
MONITOR OUT V jack: Video signals are output to the
J
connected monitor or TV.
PRE OUT jacks: A power amplifier or subwoofer with
K
built-in amplifier is connected.
PRE/LINE OUT ZONE2 jack: Audio output jacks
L
connected to the integrated amplifier for multi-zone
playback in a separate room.
SPEAKERS terminals: Speakers are connected. To
M
use the Multi-zone function, connect the speakers in the
separate room to the ZONE2 speaker terminals.
17