Adjusting The Position Of The Release Lever - Invacare Dragon Vertic User Manual
Power wheelchair
Hide thumbs
Also See for Dragon Vertic:
- Service manual (67 pages) ,
- User manual (72 pages) ,
- User manual (99 pages)
Table of Contents
Advertisement
9.5.2
Adjusting the position of the release lever
WARNING: Danger of injury, in case one of the fixation bolts loosens or falls out, as a
result of incorrect assembly!
• The lower nut on the fixation bolt must always be tightened to 15 Nm after all assembly work!
Requirements:
• Open-end spanner 13 mm
• Torque spanner 13 mm
• Loosen the fixation nut (1) of the release lever.
• Adjust the lever to the desired position.
• Re-tighten the nut to 15 Nm.
57
Advertisement
Table of Contents
