Assembly - Nikon Eclipse LV100POL Instructions Manual

Assembly

Assemble each part of the microscope by referring to the diagram on the next page.
WARNING
• Before assembling the microscope, be sure to read the
at the beginning of this instruction manual and follow the instructions written therein.
• To prevent electrical shocks and fire, turn off the power switch (flip it to the " " side)
when assembling the microscope.
CAUTION
• Be careful not to pinch your fingers or hands during assembly.
• Scratches or fingerprints on the lenses will adversely affect the microscopy image.
Handle these components carefully to keep them free from scratches and fingerprints.
If lenses are contaminated with fingerprint or such, clean them according to the
procedure described in "VI. Care and Maintenance."
• This product is a precision optical instrument. Handle it carefully and do not subject it
to a strong physical shock. (In particular, objectives may loose accuracy when
exposed to even a weak physical shock.)
Required tools
• Two hexagonal screwdrivers (2 mm) (provided with the microscope)
• One hexagonal wrench (2.5 mm) and one hexagonal wrench (3 mm) (provided with the
microscope)
When not using, place these in the tool holder at the right side of the microscope base.
Installation location
This microscope system is a precision optical instrument. The usage or storage in an inappropriate
environment may result in malfunctions or poor performance. Consider the following factors when
selecting an installation location:
• Avoid a brightly lit location, such as exposed to direct sunlight or directly under a room light.
The image quality deteriorates if there is excessive ambient light.
• Choose a location that is free from considerable dust or dirt.
• Choose a flat surface with little vibration.
• Choose a sturdy desk or table that is able to bear the weight of the instrument.
• Do not install the microscope in a hot and humid location.
• For details about the operating environment and storage environment, see "VII.
Specifications."
46
WARNING and CAUTION