Omron POWLI BN100XR Instruction Manual page 24

2. Installation and connection
2. Stationary installation
Perform installation only as shown in the diagrams below.
● Horizontal installation
This product does not have rubber feet, and there are no screw threads on the bottom side. For stationary
horizontal installation, make sure that this product does not slide or fall.
Do not place things on the units.
● Doing so may make battery change difficult due to the load.
BACK UP POWER SUPPL Y
BN100XR/BN150XR
● Upright installation (BN240XR/MB240XR)
BN100XR/BN150XR can not be installed upright.
(1) Upright installation for BN240XR
Use the stand that was included with this
product.
(2) Upright installation for BN240XR +
MB240XR
Use the included coupling plate to join the
BN240XR and the MB240XR, and then attach
the stand to both sides.
BACK UP POWER SUPPL Y
B
25% 50% 75% 100%
C
AC115V
OUTPUT
22
25% 50% 75% 100%
AC115V
OUTPUT
BN240XR
Coupling plate
B
C