Table of Contents
Advertisement
Refer to "Using the Menu" (p. 3) when adjusting the settings of these functions.
Menus for Other Camera Settings
These settings can be made from the shooting mode top menu or playback mode top menu.
Changing the display language [ • .@]
»SETUP
~
•
.@
,.., "Changing the display language" (p. 13)
Erasing data completely
[MEMORY FORMAT]/[FORMA T]
~?
SETUP
~
MEMORY FORMAT/FORMAT
I(JJ
Before formatting, check that no important data
is left in the internal memory or card.
It'!)
Non-Olympus cards and cards that have been
formatted by a computer must be formatted
with this camera before use.
Languages"
The language for the menus and
error messages displayed on the
monitor is selected.
" The available languages vary depending on the country
and/or region where the camera was purchased.
'1
Be sure to remove the card before formatting the
internal memory.
YES
NO
Completely erases the image data
in the internal memory" or card
(including protected images).
Cancels formatting.
Setting the startup display screen and
sound when the camera is turned on
[PW ON SETUP]
»
SETUP
~
PW ON SETUP
Copying images from the internal
memory to the card [BACKUP]
~f
SETUP
~
BACKUP
OFF
1
No image is displayed.
A preset image" is
displayed,
YES
Backs up image data from the
internal memory to the card.
SCREEN
2
A still image stored in the
internal memory or card is
registered for display. (This
option leads to the setup
screen.)
!~..,
It takes some time to back up data. Check that
the battery has sufficient power before starting
the backup, or use an AC adapter.
" This image cannot be changed.
NO
Cancels the backup.
VOLUME
OFF (No
sound)/LOW/ The vO.lume of the startup
HIGH
sound
IS
selected.
To register a startup image
CD
Select [2] in submenu 3 for [SCREEN].
®
Use
e~ to select the image to be registered,
and press the
~
button.
EN
'37
Advertisement
Table of Contents
