Table of Contents
Advertisement
Adjusting the brightness of the monitor
[!gj]
~ SETUP ~
101
.....
To adjust the monitor brightness
CD
Use
'Wau
to adjust the brightness while
viewing the screen, and then press the
~
button.
Setting the date and time for another
time zone [DUALTIME]
~
SETUP
~
DUALTIME
o
When [OUALTIME] is set to
[ON],
the date and
time set here are used in image file names,
dated prints and other data.
Switches to the date and
time set in [<2)].
The date and time settings
from [DUALTIME] are used
in file names, dated prints
and other data.
Information about the vertical!
horizontal orientation of the camera
during shooting is not recorded with
images. Images shot with the camera
in a vertical position are not rotated
during playback.
(Proceeds to
the setting
screen".)
OFF
ON
OFF
o
During shooting, the [0] (p.35) setting on the
playback menu is set automatically.
This function may not work properly if the
camera is facing upwards or downwards during
shooting.
Automatically rotating images shot with
the camera in a vertical position during
playback [PIC ORIENTATlON]
~
SETUP
~
PIC ORIENTATION
" The setting procedure is identical to that in "Setting the
date and time" (p. 13).
The date display order is the same as that set
with [<2)].
CANCEL.~
Date order
-+--------~
To select the date and time display order
CD
Press
~
after setting Minute, and use
<;17
au
to select the date display order.
(J)
"Setting the date and time" (p. 13)
Setting the date and time
[f!}]
~ SETUP ~
<2)
ON
Information about the verticall
horizontal orientation of the camera
during shooting is recorded with
images. Images are automatically
rotated during playback.
40
EN
Advertisement
Table of Contents
