Changing The Engine Oil - Yamaha BT1100 2002 Service Manual

1

CHANGING THE ENGINE OIL

EASB0005
CHANGING THE ENGINE OIL
1. Start the engine, warm it up for several min-
2. Place a container under the engine oil drain
3. Remove:
4. Drain:
5. If the oil filter element is also to be replaced,
Oil filter element replacement should be made
at room temperature.
a. Remove the oil filter element cover plate 1,
b. Check the O-ring 4 and replace it if it is
c. Install the new oil filter element and the ele-
6. Check:
7. Install:
4 4 2
3
8. Fill:
3-16
INSP
utes, and then turn it off.
bolt.
• engine oil filler cap 1
• O-ring
• engine oil drain bolt 2
• gasket
• engine oil
(completely from the crankcase)
perform the following procedure.
WARNING
element cover 2 and oil filter element 3.
cracked or damaged.
ment cover.
Oil filter element cover bolt
10 Nm (1.0 m•kg)
• engine oil drain bolt gasket
Damage Replace.
• gasket
• engine oil drain bolt
43 Nm (4.3 m•kg)
• crankcase
(with the specified amount of the recom-
mended engine oil)
ADJ