Yamaha BT1100 2002 Service Manual page 16

Tool No.
Flywheel puller/adapter
Puller
90890-01362
Adapter
These tools are needed to remove the
90890-04131
rotor.
Fork
Weight
(Ø 43 mm)
90890-01367
These
Adapter
installing the slide metal, oil seal and
90890-01374
dust seal into the fork.
T-handle/front fork damper rod holder
T-handle
90890-01326
These tools are needed to loosen and
Holder
tighten the front fork damper rod
90890-01327
holding bolt.
Ring nut wrench Ring nut wrench/exhaust and steering
90890-01403 nut wrench
Exhaust nut
wrench This tool is needed to loosen and tight-
90890-01268 en the steering stem ring nut.
Sheave holder
90890-01701 This tool is needed to hold the rotor
when removing or installing the rotor
bolt.
Compression gauge set
90890-03081
These tools are needed to measure
engine compression.
Vacuum gauge
90890-03094
This gauge is needed for carburetor
synchronization.
Pocket tester
90890-03112
This instrument is needed for checking
the electrical system.
Engine tachometer
90890-03113
This tool is needed for observing
engine r/min.
Tool name/How to use
seal driver weight/adapter
tools are needed
SPECIAL TOOLS
Illustration
when
GEN
INFO