CLUTCH
EAS00286
CHECKING THE PRESSURE PLATE
1. Check:
• pressure plate
Cracks/damage
• bearing
Damage/wear
EAS00285
CHECKING THE CLUTCH BOSS
1. Check:
• clutch boss splines
Damage/pitting/wear
boss.
NOTE:
Pitting on the clutch boss splines will cause errat-
ic clutch operation.
EAS00288
CHECKING THE CLUTCH PUSH RODS
1. Check:
• short clutch push rod 1
• long clutch push rod 2
Cracks/damage/wear
tive part(-s).
2. Measure:
• long clutch push rod bending limit
Out of specification
clutch push rod.
Long clutch push rod bending limit
0.5 mm
4-43
ENG
Replace.
Replace.
Replace the clutch
Replace the defec-
Replace the long