Polycom SoundPoint IP 335 Quick User Manual page 3

VOLUME ADJUSTMENT
Press the volume keys to
adjust the call volume of the active
mode. Pressing these keys in idle state
adjusts the ringer volume.
Handset volume will return to a preset
level after each call. Headset and
hands-free (speakerphone) volume will
be remembered after each call. This
configuration can be changed by 8x8
Support.
RING TYPE
You can select different rings to match
your preferences and distinguish
between calls on lines.
To change the incoming ring:
1. Press Menu , and then select
Settings > Basic > Ring Type.
2. Scroll to highlight the desired ring
type. Press the Play soft key to hear
it.
3. Press or the Select soft key to
accept the highlighted ring type, and
then press to return to the
Menu
idle screen.
© 2010, Polycom, Inc. All rights reserved. POLYCOM
registered and/or common law marks in the United States and various other countries. All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by
any means, for any purpose other than the recipient's personal use, without the express written permission of Polycom. The 8x8, Inc. logo is a registered trademark of 8x8, Inc. 8x8, Inc. is a publicly traded company.
SoundPoint IP 335 Quick User Guide for 8x8 Virtual Office Service. PM3501010 11/2010
For more details, please see the Polycom SoundPoint IP 335 User Guide available at:
AUDIBLE RINGER
You can select the default alerting
destination for incoming calls.
To change the audible ringer:
1. Press , and then select
Menu
Settings > Basic > Preferences >
Alerting Destination.
2. Scroll to highlight the desired alerting
destination for incoming calls.
3. Select the desired destination, and
then press Menu to return to the
idle screen.
®
, the Polycom "Triangles" logo and the names and marks associated with Polycom's products are trademarks and/or service marks of Polycom, Inc. and are
http://www.8x8.com/Support/BusinessSupport/Documentation.aspx
DISTINCTIVE RINGING /
CALL TREATMENT
You can set distinctive incoming ring
tones for different contacts in your local
directory.
To set a distinctive ring for a local
contact:
1. Press Menu then select Features >
Contact Directory.
2. Search for the contact (see the
section).
CONTACT DIRECTORY
3. Press the Edit soft key, then scroll
down to Ring Type and press to
edit it.
,
4. Using or select the desired
ring tone.
5. Press the Ok soft key to accept the
change, and then press Menu
twice to return to the idle screen.
HEADSET MEMORY MODE
For frequent headset users, there is an
option to default all calls to the headset.
To enable Headset Memory Mode:
1. Press and select Settings
Menu
followed by Basic, Preferences,
Headset, and Headset Memory.
2. Scroll down to Enable and press
to select it, and then press
to return to the idle screen.
Menu
To disable Headset Memory Mode:
Repeat steps 1 and 2, but select
Disable.
To activate Headset Memory Mode
(if enabled):
Press twice. The headset icon will
flash.
Page | 3