Table of Contents
Advertisement
Useful Information
Problem
Copying stopped with an
item displayed.
The display exits the
phonebook while
searching.
Caller ID
Problem
The handset does not
display the caller's phone
number.
The display exits the
caller list while searching.
Time setting is erased,
and "E Press MENU."
flashes on the handset
display.
46
Cause & solution
L The destination handset may have lost communication
with the base unit, or the destination handset user may
have pressed {C} or {s}.
The displayed phonebook item was not copied to the
handset. Press {OFF}. Confirm that the destination
handset is in standby mode (i.e., not in use) and try
again.
L The handset automatically exits after 1 minute of
inactivity.
Cause & solution
L You have not subscribed to Caller ID service. Contact
your telephone company to subscribe.
L If your unit is connected to any additional telephone
equipment such as Caller ID box or wireless telephone
jack, disconnect the unit from the equipment and plug
the unit directly into the wall jack.
L If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
L Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L The caller requested not to send caller information
(page 26).
L If a call is being transferred to you, the caller information
will not be displayed.
L The handset automatically exits after 1 minute of
inactivity.
L If a power failure occurs, time setting may be erased.
Set the date and time again (page 16).
Advertisement
Table of Contents
