Table of Contents
Advertisement
Preparation
L When more than one unit is used, the
units may interfere with each other. To
prevent or reduce interference, please
keep ample space between the base
unit.
L The unit will not work during a power
failure. We recommend connecting a
standard telephone to the same
telephone line or to the same telephone
jack using a T-adaptor. Emergency
power can be supplied to the unit by
connecting a Panasonic battery back-up
power supply noted on page 5.
If you subscribe to a DSL service
L Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Caller ID features (page 26) do not
function properly.
To single-line
telephone jack
Telephone
Noise filter
line cord
(For DSL users)
10
Battery installation
1
Insert the battery (1), and press it
down until it snaps into the
compartment (2).
1
2
Close the handset cover.
2
Advertisement
Table of Contents
