Cleaning The Plasma Monitor - Sanyo PDP-42H1ENV Owner's Manual

SETTING
Color temperature
This function is used for selecting color temperature. Select
"Normal", "Cool" or "Warm" with
select.
No operation shut off timer
This function turns off Plasma Monitor's power automatically, when
there is no operation of Remote Control or Front Control for 3 hours.
When "On" mode selected, if there is no operation for 3 hours, the
message "No operation : Power off" will be displayed for about 1
minute, and Plasma Monitor's power will be turned off automatically.
Video Format
Refer to "SELECTING VIDEO SYSTEM". (P33)
Reset
All adjustments in the memory can be reset to factory-settings.
1) Press button . Reset menu will appear.
2) Press buttons to select "On" and then press OK button. All
adjustments in the memory is reset to factory-settings.
Be sure to disconnect the AC Power cord from AC outlet before cleaning the Plasma Monitor.
Clean your Plasma Monitor as follows ;
G
Gently wipe the screen and cabinet with dry soft cloth.
G
The screen is likely to be damaged if it is not maintained properly. Do not use hard objects
like a hard cloth or paper. Do not use solvents or abrasives.
CAUTION :
Do not use benzene, thinner, or any volatile substances to clean the Plasma Monitor. These
chemicals may damage the cabinet finish.
36
buttons which you wish to

CLEANING THE PLASMA MONITOR

Reset
Return to factory settings
On Off
: Select OK : OK
MENU : Return STATUS : Exit