Sanyo PDP-42H1ENV Owner's Manual page 10

PREPARATION
INSTALLATION OF OPTIONAL SPEAKERS AND STAND
Please read the each option's instruction manual (or installation manual) for the installation.
CAUTION IN INSTALLATION
G Through installation work, handling with more than two people is recommended.
G When holding (moving or lifting) the Plasma Monitor, hold the Monitor's body. Do not
handle it by holding the attached accessory parts (the Speakers), otherwise damage
could be result.
G Provide space that enough larger than the screen size. The surface must be flat and
maintained with soft material (cloth or blanket) for protecting the screen surface.
G Before placing the Plasma Monitor Screen facing down, make sure there is no object under the screen.
Leaving any object may cause damage on the screen surface.
SPEAKERS ( OPTIONAL )
Place the Speakers to each side of the Plasma Monitor
and attach Right and Left brackets with the specified
screws. Mount each screw on proper screw hole position
and fix it securely.
Connect the red wire to the red terminal on both of the
Plasma Monitor and the speakers and connect the black
wire to the black terminal to make correct polarity.
TABLE TOP STAND ( OPTIONAL )
Assemble Table top stand according to the installation
manual of the stand.
Mount the stand on the back of the Plasma Monitor by
fixing the Arms with screws (3 pcs. for each arm).
10
Speaker Terminal
Right Speaker
Red:(+), Black:(-)
Arm
Left Speaker
Table top stand