TO THE OWNER Before operating this Plasma Monitor, read this manual thoroughly and operate the Plasma Monitor properly. This Plasma Monitor provides many convenient features and functions. Operating the Plasma Monitor properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents.
Mount Unit . Use with other stands or mount units is capable of manufacturer that have the same characteristics as the resulting in instability causing possible injury. original part. Unauthorized substitutions may result in fire, electric shock, or injury to persons. SANYO Table top stand KA-TD-42V SANYO Tilt mount unit KA-TI-42V Plasma...
COMPLIANCES European Norm Compatibility / CE This machine is provided with the CE-mark and therewith corresponding to the norms that are valid for its operation at present. Thus the effective guidelines on the electromagnetic compatibility 89/336/EWG and safety regulations according to low voltage guideline 73/23/EWG and 93/68/EWG are guaranteed.
TABLE OF CONTENTS PREPARATION COMPUTER MODE NAME OF EACH PART OF PLASMA MONITOR 6 SELECTING COMPUTER SYSTEM SETTING-UP PLASMA MONITOR PC ADJUSTMENT CONNECTING PLASMA MONITOR SETTING TERMINALS OF PLASMA MONITOR SETTING MENU CONNECTING TO COMPUTER SCREEN SAVER FUNCTION SET CLOCK ON/OFF TIMER BEFORE OPERATION APPENDIX...
PREPARATION NAME OF EACH PART OF PLASMA MONITOR FRONT PLASMA DISPLAY PANEL FRONT CONTROLS AND INDICATORS FRONT CONTROLS MENU BUTTON CURSOR BUTTON Used to select MENU Used to set and adjust the operation. (P15) menu data on On-Screen Menu. (P15) OK BUTTON CURSOR BUTTON...
Page 7
PREPARATION NAME OF EACH PART OF PLASMA MONITOR BACK This Plasma Monitor detects internal temperature and This terminal is provied on automatically controls models PDP-42WV2 and operating power of Cooling PDP-42WV2A only. Fans. TERMINALS POWER CORD AND CONNECTORS CONNECTOR (SIDE) (Refer to page 11) SPEAKER OUTPUT TERMINALS...
PREPARATION SETTING-UP PLASMA MONITOR CONNECTING AC POWER CORD This Plasma Monitor uses nominal input voltages of 100- 120 V or 200-240 V AC. The Plasma Monitor automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor.
Page 9
PREPARATION INSTALLATION OF OPTIONAL SPEAKERS AND STAND Please read the each option's instruction manual (or installation manual) for the installation. CAUTION IN INSTALLATION G Through installation work, handling with more than two people is recommended. G When holding (moving or lifting) the Plasma Monitor, hold the Monitor's body. Do not handle it by holding the attached accessory parts (the Speakers), otherwise damage could be result.
Page 10
PREPARATION TABLE TOP STAND ( OPTIONAL ) Soft Cloth Assemble Table top stand according to the installation manual of the stand. Place the Plasma Display screen facing down on a flat surface place where maintained with soft materials (such as a blanket) for protecting the display screen. Insert the Stand into the slot of the Plasma Display.
CONNECTING PLASMA MONITOR TERMINALS OF PLASMA MONITOR This Plasma Monitor has INPUT TERMINALS and OUTPUT TERMINALS on its side and back, for connecting computers and video equipment. Refer to the figure on page 12 and connect properly. This terminal is not available for computer connection.
CONNECTING PLASMA MONITOR CONNECTING TO COMPUTER Cables used for connection (Those Cables and Adapter are not supplied with this Plasma Monitor • VGA Cable (HDB 15 pin) • MAC Adapter (in the case of connecting Macintosh computer) NOTE : When connecting the cable, AC Power Cords of •...
BEFORE OPERATION OPERATION OF REMOTE CONTROL Remote Control Unit can be used as either Wired or Wireless. MUTE BUTTON POWER ON-OFF BUTTON Used to mute sound. (P23) Used to turn Plasma Monitor on or off. (P18) PICTURE BUTTON BACK BUTTON Used to select image level.
BEFORE OPERATION WIRED REMOTE CONTROL OPERATION NOTE: Wireless Remote Control does not work When using this Remote Control Unit as Wired Remote when Remote Control Cable Control, Connect Remote Control Unit to R/C JACK with connected on Plasma Monitor or Remote Remote Control Cable (supplied).
BEFORE OPERATION OPERATING ON-SCREEN MENU You can control and adjust this Plasma Monitor through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. BUTTONS OF ON-SCREEN MENU OPERATION REMOTE CONTROL UNIT CURSOR ed7 8 ➡ BACK INPUT BACK...
BEFORE OPERATION MENU LIST Picture setup Sound PC mode adjustment System setup Time setup Timer setup PICTURE SETUP MENU Picture adjustment Contrast Display position Brightness Cinema auto Color Tint Sharpness Color temperature Normal Fleshtone Gamma Vertical Horizontal Move Move Cinema auto SOUND MENU Treble Bass...
Page 17
BEFORE OPERATION MENU LIST(Continue) Picture setup Sound PC mode adjustment System setup Time setup Timer setup SYSTEM SETUP MENU English Language DVI setup HDCP Color system Auto Eco mode Child lock No operation shut off timer Screen saver Reset Information Pic rotation Cycle time 30Min...
BASIC OPERATION TURNING ON / OFF PLASMA MONITOR Complete the peripheral connections (with Computer) before turning on Plasma Monitor. (Refer to "CONNECTING PLASMA POWER indicator MONITOR" on Page 12 for connecting that equipment.) green: ON red: OFF(standby mode) Connect the Plasma Monitor's AC Power Cord into an AC outlet. orange: On timer mode Press MAIN ON/OFF button on Front Control of Plasma Monitor to turn ON.
BASIC OPERATION PICTURE IMAGE LEVEL SELECT Select image level among Graphic, Standard, Text, and Memory by pressing PICTURE button on the Remote Control Unit. Graphic Graphic Select this mode when watching graphic image. Standard Standard Normal picture level preset on this Plasma Monitor. Text Text Select this mode when watching text image.
BASIC OPERATION IMAGE LEVEL ADJUSTMENT PICTURE SETUP MENU Press MENU button and ON-SCREEN MENU will appear. Picture adjustment Press ed buttons to select "Picture setup" menu, and press OK Display position button. "Picture setup" menu will appear. Cinema auto Press ed buttons to select "Picture adjustment" menu, and : Select : OK press OK button.
BASIC OPERATION WIDE IMAGE ADJUSTMENT Press MENU button and ON-SCREEN MENU will appear. PICTURE SETUP MENU Picture adjustment Press ed buttons to select "Picture setup" menu, and press OK Display position button. "Picture setup" menu will appear. Cinema auto Press ed buttons to select "Display position" menu, and press : Select : OK OK button.
BASIC OPERATION WIDE SCREEN OPERATIONS Select screen size among "Natural wide", "Zoom", "Zoom(Caption- WIDE button IN)", "Full" and "Normal" by pressing WIDE button on Remote Control ✽ Natural wide Unit. ✽ "Natural wide" or "Zoom(Caption-IN)" mode cannot be selected on Zoom this model.
BASIC OPERATION SOUND ADJUSTMENT VOLUME Indicates the roughly level (yellow) of volume. Press VOLUME (+/–) button(s) on Remote Control Unit or Front Control to adjust volume. Volume dialog box appears on the screen for a few seconds. (+) button to increase volume, and (–) button to decrease volume. MUTE (red) Press MUTE button on Remote Control Unit to cut off sound.
COMPUTER MODE SELECTING COMPUTER SYSTEM This Plasma Monitor automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to "COMPATIBLE COMPUTER SPECIFICATIONS" on page 27). When selecting Computer, this Plasma Monitor automatically tunes to incoming signal and display proper image without any special setting. (Some computers need setting manually.) If the Monitor cannot be tuned, follow in message will be displayed.
COMPUTER MODE PC ADJUSTMENT PC MODE ADJUSTMENT "PC mode adjustment" menu is provided to adjust "Auto setup", "Clock", "Phase", "Position" and "Power save" to conform to your computer. These function can be operated as follows: Press MENU button and ON-SCREEN MENU will appear. PC MODE ADJUSTMENT MENU Auto setup Clock...
Page 26
COMPUTER MODE Power save Power save Enable or disable Power save function. Enable Power save by choosing "ON" with 7 8 buttons. : Select BACK MENU : Back : Exit NOTE : This function automatically reduces the Plasma Monitor's power consumption if the computer is not operated for a certain period of time.
Page 27
COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS This Plasma Monitor can accept the signal from all computers with the V, H-Frequency mentioned below and less than 140 MHz of Dot Clock. H-Freq. V-Freq. H-Freq. V-Freq. ON-SCREEN ON-SCREEN RESOLUTION RESOLUTION (kHz) (Hz) (kHz) (Hz) DISPLAY DISPLAY...
SETTING SETTING MENU Press MENU button and ON-SCREEN MENU will appear. SYSTEM SETUP MENU Language English Press ed buttons to select "System setup", and press OK DVI setup HDCP Color system button. "System setup" will appear. Auto Eco mode Child lock Press ed buttons to select the item that you want to setup, and No operation shut off timer setup the selected item by pressing 7 8 buttons.
Page 29
SETTING Reset Return to factory settings All adjustments in the memory can be reset to factory-settings. 1) Press OK button . Reset menu will appear. 2) Press 7 8 buttons to select "Yes", and press OK button. All : Select : OK adjustments in the memory is reset to factory-settings.
SETTING SCREEN SAVER FUNCTION Displaying a still picture (non-movement) on the screen for a long time cause afterimage (ghost) on the screen. To neutralized the remaining image, Screen Saver function (3 modes) is provided in the Monitor. Use the function conveniently. SELECTING SCREEN SAVER Press MENU button and ON-SCREEN MENU will appear.
SETTING SIDE BAR When 4 : 3 image of screen saver is displayed for a long period of time, the 4 : 3 image and black bars on side will remain as the burning image. "Side bar" function changes the black bars into gray and the burning image can be neutralized.
APPENDIX CLEANING PLASMA MONITOR Be sure to disconnect the AC Power cord from AC outlet before cleaning the Plasma Monitor. Clean your Plasma Monitor as follows: G Gently wipe the screen and cabinet with dry soft cloth. G The screen is likely to be damaged if it is not maintained properly. Do not use hard objects like a hard cloth or paper.
APPENDIX TROUBLESHOOTING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected Plasma Monitor to your equipment as described in the section "CONNECTING PLASMA MONITOR" on page 12. 2. Check cable connection. Verify that all computer and power cords are properly connected. 3.
Page 34
APPENDIX Problem: Try these Solutions G There may be some tiny black points and/or bright points on PDP (Plasma Display There are tiny black Panel). These points are normal. points and/or bright points on the PDP. G The Plasma Monitor has trouble, and Self Diagnose function activates. The POWER (Refer to P32) indicator is flashing.
R and L, 10W (8 Ω), Push type EXT. SP OUT POWER SUPPLY AC 200 - 240V 50/60 Hz (PDP-42WV1/PDP-42WV2) AC 100 - 120V 50/60 Hz (PDP-42WV1A/PDP-42WV2A) DIMENSION (W x H x D) 402.4" x 240.2" x 33.5" ) (not including handles)
Page 36
APPENDIX MEASUREMENT 1022 (40.2) 1022 (40.2) (4.0) (24.0) (24.0) (3.4) Size in mm (inch) OPTIONS The products listed below are optionally supplied. When ordering these products, give name and Type No. to sales dealer. Speaker unit KA-SX-42V (R and L) [BLACK] KA-SX-42VS (R and L) [SILVER] Table top stand KA-TD-42V...
Page 37
APPENDIX CONFIGURATIONS OF RS232C TERMINALS RS232C TERMINAL Terminal : HDB9-PIN Connect the serial port of computer to this terminal with Serial Cross Cable (not supplied). Pin Configuration INTERFACE No Connect No Connect Protocol RS-232C R x D No Connect Baud rate 9600 bps T x D No Connect...
Page 38
APPENDIX CONFIGURATIONS OF PC TERMINALS PC IN (D-SUB) TERMINAL Terminal : HDB15-PIN Connect the display output terminal of computer to this terminal with VGA Cable (not supplied). When connecting the Macintosh computer, the MAC Adapter (not supplied) is required. Pin Configuration Red Input No Connect Green Input...
Page 40
Printed in Japan Part No. 610 305 7934 (1AA6P1P3922-- J3TF) SANYO Electric Co., Ltd...