COMPUTER MODE
Power save
Enable or disable Power save function.
Enable Power save by choosing "Yes" with
NOTE :
G
The Power save function automatically reduces the Plasma
Monitor's power consumption if the computer is not operated for a
certain period of time. This function can be used when using the
Plasma Monitor with a computer conforming to the VESA DPMS
standard.
G
To activate power save, computer setup is also needed. (Refer to
Computer Operation manual. )
Information
Indicate the input signal information.
30
PC mode adjustment
Power save
buttons.
MENU
PC mode adjustment
Information
MENU
Yes
: Adjust
: Return
STATUS : Exit
1024 x 768 FH: 58.03kHz
FV: 72.00 Hz
: Return STATUS
: Exit