Installation Instructions; Location - Carrier MOBILE TYPE AIR CONDITIONERS Owner's Manual

OPERATING INSTRUCTIONS
Adjust
manually
Fig.4
SLEEP operation
Press this button, the set temperature will increase
O O
(cooling) or decrease(heating) by 1 C/2 F in 30
minutes.The set temperature will then increase
(cooling) or decrease (heating) by another 1
after an additional 30 minutes. This new temper-
ature will be maintained for 7 hours before it returns
to the originally selected temperature. This ends
the Sleep mode and the unit will continue to ope-
rate as originally programmed.
NOTE: This feature is unavailabe under FAN or
DRY mode.
Other features
Auto-Restart(on some models)
If the unit breaks off unexpectedly due to the
power cut,it will restart with the previous
function setting automatically when the powe
resumes..
Wait 3 minutes before resuming operation
After the unit has stopped, it can not be restarted
operation in the first 3 minutes. This is to protect
the unit. Operation will automatically start after
3 minutes.
Air flow direction adjustment
Adjust the air flow direction manually
(Fig.4):
The louver can be set to the desired position
manually.
Do not place any heavy objects or other loads
on the louver, doing so will cause damage to
the unit.
Ensure the louver is fully opened under
heating operation.
Keep the louver fully opened during
operation.
8
O O
C/2 F
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
or
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
or
Horizontal
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
INSTALLATION INSTRUCTIONS (optional )

INSTALLATION INSTRUCTIONS

Location

The air conditioner should be placed on a firm
foundation to minimize noise and virbration. For
or
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support the unit.
The unit has casters to aid placement, but it should
only be rolled on smooth, flat surfaces. Use caution
Fig.5
when rolling on carpet surfaces. Do not attempt to
roll the unit over objects.
The unit must be placed within reach of a properly
rated grounded socket.
Never place any obstacles around the air inlet or
outlet of the unit.
Allow at least 30cm of space from the wall for
efficient air-conditioning.
Window Slider kit Installation
Your window slider kit has been designed to fit most
standard Vertical and horizontal window
applications, However, it may be necessary for you to
improvise/modify some aspects of the installation
procedures for certain types of window. Please refer
to Fig. 6& Fig.7 for minimum and maximum window
openings.Window slider kit can be fixed with a bolt
(see Fig.7a).
Note: If the window opening is less than the mentioned
minimum length of the window slider kit, cut that one
Fig.6
with a hole in it short to fit for the window opening. Do
never cut out the hole in window slider kit.
bolt
Window slider kit
Fig.7
9
bolt
or
Window
slider kit
Fig.7a