Setting Font Tab Options - Variquest VisiMate Setup Manual

T S L
O ET THE
The Size and Location tab options let you set the precise location for an object. This is
helpful for laying out complex items, or when you want to line up multiple objects on an
item.
Example: To set location, think of the screen as a grid with the origin of 0,0 (X axis at 0, Y
axis at 0) at the upper left corner of the printable area of the item. For example, if you set the
Left field to two inches and the Top field to one inch, the object prints two inches from the
left of the item and one inch from the top of the item.
Note: If you have previously rotated an object, the Location options are not available.
1. Press Object Properties to display the Properties screen.
2. Choose the Size and Location tab.
3. In the Left field, enter the number of inches or millimeters from the left side of the
printable area to locate the object.
4. In the Top field, enter the number of inches or millimeters from the top of the printable
area to locate the object.
5. After you change all settings, click OK. The location you set becomes the default
location for the object.

Setting Font Tab Options

The Font tab lets you change font options for the selected object. The Font tab is included
on the Text Properties screen and on the Bar Code Properties screen.
Note: Changes you make using the Font tab options apply to the entire text object, and may
override formatting changes you previously made to the text characters.
O
OCATION OF AN BJECT
6
Working with Objects
33
-