Sound Quality - Panasonic SC-PM10 Operating Instructions Manual

Headphones
(not included)
Top of the unit

Sound Quality

A
Using the built-in sound quality settings
You can choose one of four types of sound quality.
HEAVY: Adds punch to rock
SOFT: For background music
CLEAR: Clarifies higher sounds
VOCAL: Adds gloss to vocal
Press [PRESET EQ] to select a setting.
Each time you press the button:
HEAVY SOFT CLEAR
EQ-OFF (cancelled)
Note
You cannot use [PRESET EQ] and [BASS]/[TREBLE]
together. Changes to sound quality do not affect
recordings.
Using the "live" effect (SOUND
B
VIRTUALIZER)
The sound virtualizer leaves middle-range sounds such as
vocals clear and gives natural width and depth to music.
Sound virtualizer is effective with stereo sound.
Press [SOUND VIRTUALIZER]
" ".
To cancel
Press [SOUND VIRTUALIZER] to clear the "
indicator.
• When listening through headphones, the effect is less dis-
cernible than through the unit's speakers.
• If interference in FM stereo reception increases, cancel
the sound virtualizer effect.
C
To adjust the tone quality
by remote control only
1
Press [BASS] (to
sound) or [TREBLE]
frequency sound).
2
Press [VOL –] or [+ VOL] to adjust the level.
The tone level can be varied within a range of -5 to +5.
Note
Changes to tone quality do not affect recordings.
D
Listening with headphones
Reduce the volume level, and connect the headphones.
Plug type: 3.5 mm ( 1 / ")stereo.
8
Note
Avoid listening for prolonged periods of time to prevent
hearing damage.
VOCAL
to display
"
select low-frequency
(to select high-
19
RQT6675