Changing The Sound Quality; Adjusting The Power Blaster - Panasonic RX-DS28 Operating Instructions Manual

POWER
BLASTER
POWER BLASTER indicator
e SSS SS
SLEEP — VOLUME +
COO Q
CD RAMO CASSETTE
SLEEP — VOLUME +
COO Q
CD RADIO CASSETTE
[changing the sound quality |
aiio the POWER BLASTER a
When the POWER BLASTER is on, the level of the sound is boosted.
Press POWER BLASTER.
POWER BLASTER indicator lights when this function is activated.
To cancel POWER BLASTER function:
Press POWER BLASTER to turn the indicator off.
To resume Power Blaster, press the button again.
@ When listening through headphones
Turning Power Blaster on heighten the volume. Take care not to
damage your hearing.
@ Tuming Power Blaster on/off will not affect the recording.
by remote control only
When the XBS level control is adjusted, the level of the dynamic low
frequency sound range is boosted.
Press XBS.
Every time you press the button: XBS <-> XBS OFF
The "live" effect allows enjoyment of the 3-D feeling of listening
to live music. Compared with earlier surround sound systems,
the sound virtualizer leaves middle-range sounds such as vocals
clear and gives natural width and depth to music.
Sound virtualizer is only effective with stereo sound.
Press S.VIRTUALIZER to display the sound virtualizer
indicator.
To cancel:
Press S.VIRTUALIZER to clear the sound virtualizer indicator,
@ When listening through headphones
The effect is less discernable than through the unit speakers.
@ When excessive interference in FM stereo reception occurs
If interference increases, cancel the sound virtualizer effect.
2
£
5
$
D
£
£
$
~