Table of Contents
Advertisement
Specifications
AMPLIFIER SECTION
FTC Power output
10% Total harmonic distortion
30 Hz–20 kHz, both channels driven
RMS Power output
10% Total harmonic distortion
1 kHz, both channels driven
Output impedance
Headphone
FM TUNER SECTION
Frequency range
Sensitivity
S/N 26 dB
Antenna terminal(s)
AM TUNER SECTION
Frequency range
Sensitivity
S/N 20 dB (at 1000 kHz)
CASSETTE DECK SECTION
Track system
Heads
Record/playback
Erasure
Motor
Recording system
Erasing system
Tape speed
Overall frequency response
(+3 ~ -6 dB at DECK OUT)
NORMAL (TYPE I)
S/N
Wow and flutter
Fast forward and rewind time
Approx. 120 seconds with C-60 cassette tape
CD SECTION
Sampling frequency
Decoding
Beam source/wavelength
Number of channels
Wow and flutter
Digital filter
D/A converter
SPEAKER SECTION
Type
Speaker(s)
Full range
Tweeter
Impedance
Input power
Output sound pressure level
Frequency range
Dimensions (WxHxD)
Mass
GENERAL
Power supply
Power consumption
Dimensions (WxHxD)
Mass
Power consumption in standby mode 0.5 W
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
24
© 2003 Matsushita Electric Industrial Co., Ltd.
Printed in Malaysia
RQT6675
14W per channel (6 Ω)
15W per channel (6 Ω)
16-32 Ω
87.9–107.9 MHz (200 kHz steps)
87.5–108.0 MHz (100 kHz steps)
2.0 µV (IHF)
1.5 µV
75Ω (unbalanced)
520 – 1710 kHz (10 kHz steps)
560 µV/m
4 track, 2 channel
Solid permalloy head
AC erase head
DC servo motor
AC bias 100 kHz
AC erase 100 kHz
4.8 cm/s
35 Hz – 14 kHz
50 dB (A weighted)
0.15% (WRMS)
44.1 kHz
16 bit linear
Semiconductor laser/780 nm
Stereo
Below measurable limit
MASH (1 bit DAC)
2 way speaker system
10 cm (4˝) cone type
6 cm (2
3
/
˝) cone type
8
30 W (Music)
82 dB/W (1.0 m)
55 Hz–22 kHz (–16 dB)
70 Hz – 20 kHz (–10 dB)
140 x 225 x 228 mm
(5
1
/
˝ x 8
7
/
˝ x 9
2
8
1.95 kg (4.33 lb.)
AC 120 V, 60 Hz
165 x 228 x 313 mm
(6
1
/
˝x 9 ˝ x 12
2
3.6 kg (8 lb.)
Note:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital
spectrum analyzer.
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a damp cloth.
• Never use alcohol, paint thinner or benzine to clean this
unit.
• Before using chemically treated cloth, read the instructions
that came with the cloth carefully.
For a cleaner, crisper sound
Clean the heads regularly to assure good quality playback
and recording.
Use a cleaning tape (not included).
Product Service
1. Damage requiring service —The unit should be serviced
by qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been
damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a
marked change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond
that described in these operating instructions. Refer all
other servicing to authorized servicing personnel.
8 fs
3. Replacement parts—When parts need replacing ensure
the servicer uses parts specified by the manufacturer or
parts that have the same characteristics as the original
parts. Unauthorized substitutes may result in fire, electric
shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer
6 Ω
to perform safety checks to confirm that the unit is in
proper working condition.
Product information
For product information or assistance with product
1
/
˝)
8
operation:
Contact the Panasonic Canada Inc. Customer Care
Centre at 905-624-5505, or visit the website
38 W
(www.panasonic.ca), or an authorized Servicentre
closest to you.
11
/
˝)
32
En
RQT6675-1P
L0203KW1033
Hide quick links:
Advertisement
Table of Contents
