The Radio: Preset Tuning - Panasonic SC-PM10 Operating Instructions Manual

PROGRAM
PROGRAM
MHz
PROGRAM
Preset channel
PROGRAM

The radio: preset tuning

by remote control only
There are two methods of presetting stations.
Automatic presetting: All the stations the tuner can
receive are preset.
Manual presetting: You can select the stations to
preset and the order they are
preset in.
Up to 15 stations each can be set in the FM and AM bands.
Preparation:
Press [TUNER/BAND] to select "FM" or "AM".
A
Automatic presetting
Do the following once each for FM and AM.
Preparation:
Tune to the frequency where presetting is to begin (\ page
10).
Press and hold [PROGRAM/–CLEAR].
The tuner presets all the stations it can receive into the
channels in ascending order. When finished, the last station
memorized is tuned in.
Manual presetting
1
Preset the stations one at a time.
Press [PROGRAM/ – CLEAR]
[g, REW/ 4 4 4 4 4 ] or [f, 3 3 3 3 3 / FF] to tune to the
2
radio station.
Press [PROGRAM/ –CLEAR]
[g, REW/ 4 4 4 4 4 ] or [f, 3 3 3 3 3 / FF] to select a
3
memory number.
Press [PROGRAM/–CLEAR].
The station occupying a memory number is erased if anoth-
er station is preset in that memory number.
B
Selecting channels
1
Press the numbered buttons to select the
channel.
For channels 1 to 9 press the corresponding number.
For channels 10 to 15 press [ 10], then the two digits.
1
OR
Press [TUNE
2
.
" PROGRAM "
Press [g, REW/ 4 4 4 4 4 ] or [f, 3 3 3 3 3 / FF] to
select the channel.
2
Adjust the volume.
then press
then press
MODE] to select
11
RQT6675