Vision Fitness X6850HRT Owner's Manual page 33

TROUBLESHOOTING YOUR INCLINE ELLIPTICAL TRAINER
Our Incline Elliptical Trainers are designed to be reliable and easy to use.
If, however, you have a problem, these troubleshooting steps may indicate
the cause.
PROBLEM: The console does not light up.
SOLUTION: Make sure the wire harness is plugged into the back of the
console.
PROBLEM: The Incline Elliptical Trainer makes a squeaking or creaking noise.
SOLUTION: Check and tighten all the bolts on the Incline Elliptical Trainer.
SOLUTION: Clean the track and the roller wheels with a cloth and a mild
cleaning detergent.
NOTE:
If the above steps do not remedy the problem, discontinue use, turn
the power off and contact your retailer.
OBTAINING SERVICE
Do not attempt to service this Incline Elliptical Trainer yourself except for the
maintenance tasks described in this manual. For information on service to
your VISION FITNESS Incline Elliptical Trainer, contact the local retailer
from whom you purchased the Incline Elliptical Trainer. To expedite
service, please make sure to have your serial number available. The serial
number is found on a label located on the front support tube of your Incline
Elliptical Trainer.
SERIAL NUMBER:______________________
29