CENTERING THE BELT
If the running belt is too far to the right side, use the supplied Allen
wrench to turn the right tension bolt clockwise 1/4 turn at a time until
the belt remains centered during use.
If the running belt is too far to the left side, turn the left tension bolt
clockwise 1/4 turn at a time until the belt remains centered during use.
If the belt is too far to the left side:
1) Turn the left roller bolt 1/4 turn clockwise (tighten).
If the belt is too far to the right side:
1) Turn the right roller bolt 1/4 turn clockwise (tighten).
omega
19