Linksys PAP2 Installation Manual page 2

Action
Enter IVR Menu
Check DHCP
Set DHCP
Check IP
address
Set IP Address
Check Net Mask
Set Net Mask
Check Gateway
Set Gateway
Check MAC
Address
Check Firmware
Version
Manual Reboot 7326668
PAP2 Menu Options
Smart Member Services Linksys PAP2 Installation Guide
PAP2 MENU OPTIONS
Code User Input
**** None
100 None
101 Enter 1 to enable.
Enter 0 to disable.
110 None
111 Enter value using the
numbers on the
telephone keypad. Use
the star (*) key when
entering a decimal point.
120 None
121 Enter value using the
numbers on the
telephone keypad. Use
the star (*) key when
entering a decimal point.
130 None
131 Enter the value using the
numbers on the
telephone keypad. Use
the star (*) key when
entering a decimal point.
140 None
150 None
None
Behavior Notes
Do not press any other keys
until you hear, "Configuration
menu. Please enter option
followed by the pound (#)
key, or hang up to exit."
The system announces if
DHCP is enabled or disabled.
Enter the option, followed by
the pound (#) key.
Enter the value, followed by
the pound (#) key. DHCP
must be "Disabled,"
otherwise you will hear the
announcement, "Invalid
Option" if you try to set this
value.
Enter the value, followed by
the pound (#) key. DHCP
must be "Disabled,"
otherwise you will hear the
announcement, "Invalid
Option" if you try to set this
value.
Enter the value, followed by
the pound (#) key. DHCP
must be "Disabled,"
otherwise you will hear the
announcement, "Invalid
Option" if you try to set this
value.
You will hear the phone
adapter's MAC address.
You will hear the phone
adapter's firmware version.
After you hear, "Option
successful," hang up the
phone. The phone adapter
will automatically reboot.