Linksys Sipura Installation Instructions page 4

Enter IVR Menu
Check DHCP
Enable/Disable DHCP
Check IP Address
Set Static IP Address
Check Network Mask
Set Network Mask
Check Static Gateway
IP Address
Set Static Gateway IP
Address
* * * *
100#
101#
110#
111#
120#
121#
130#
131#
None
None
Enter 1 to enable
Enter 0 to disable
None
Enter IP address
using numbers on the
telephone key pad.
Use the *(star) key
when entering a
decimal point.
None
Enter value using
numbers on the
telephone key pad.
Use the * (star) key
when entering a
decimal point.
None
Enter IP address
using numbers on the
telephone key pad.
Use the *(star) key
when entering a
decimal point.
None. Ignore SIT or other tones
until you hear, "Linksys
configuration menu. Please enter
option followed by the pound key
or hang-up to exit."
IVR will announce if DHCP in
enabled or disabled.
IVR will announce current IP
Address of PAP2
DHCP must be "Disabled"
otherwise you will hear, "Invalid
Option," if you try to set this
value.
IVR will announce the current
network mask of PAP2.
DHCP must be "Disabled"
otherwise you will hear, "Invalid
Option," if you try to set this
value.
IVR will announce the current
gateway IP address of PAP2.
DHCP must be "Disabled"
otherwise you will hear, "Invalid
Option," if you try to set this
value.