Friendly Robotics Robomow RL350 Operating & Safety Manual page 10

11. Over-Current Monitoring Protection
Each of the three blade motors and each of the two wheel drive motors are monitored
continuously during operation for any situation that may cause these motors to over-heat. In such
event, the Robomow will stop operation of at least that motor and possibly the mower itself and
indicate that the motor is cooling down. While unusual, this may happen when the mower is put in
grass that is severely overgrown; the underside of the mower is clogged from poor cleaning
maintenance; the mower has encountered an obstacle that is unable to activate the bumper
sensor preventing it from moving; or a problem landscape area has caused the mower to get stuck
and is preventing it from moving.
12. Automatic departure warning alert
When the mower is scheduled to depart the Docking Station automatically per a scheduled time, a
warning buzzer and the operating lamp will activate 5 minutes prior to departure. This is a warning
notification to clear and inspect the area.
It is intended to highlight an important safety,
10
WARNING!
This warning symbol will be found at several
points throughout the pages of this manual.
warning or cautionary message.
Please pay particular attention to these
areas and be sure you fully understand
the message before proceeding.
!