Customizing the Phone Screen
You can customize the left softkey (when the phone is idle), your phone screen display brightness, and
the language on your phone screen.
If you want to...
Set up the left softkey to
open the Phone Book
Set up the left softkey to
access your messages
Change the phone display
brightness
Change the length of time
for the screen to display
Cisco Unified Wireless IP Phone 7921G for Cisco Unified Communications Manager 4.3, 5.1, 6.0 and Later
Then...
1. Choose
Page.
2. Press Change.
3. Select Phone Book.
4. Press Save. The left softkey will be displayed as "Ph Book" when
the phone is idle.
1. Choose
Page.
2. Press Change.
3. Select Message.
4. Press Save. The left softkey will be displayed as "Message" when
the phone is idle.
1. Choose
2. Select Display Brightness
Note
To make a display brightness selection, press the number key for
the item, the
3. Press
to increase the brightness or
4. Press Save to make the change or Cancel.
1. Choose
2. Select Display Timeout
3. Select one of the following:
• 10 seconds
• 30 second (default setting)
• 1 minute
• 2 minutes
4. Press Save to make the change or Cancel.
Note
When the display setting time has expired, the screen dims for 10
seconds, then goes dark.
(Settings) > Phone Settings > Customize Home
(Settings) > Phone Settings > Customize Home
(Settings) > Phone Settings > Display Settings.
.
button, or the Change softkey.
(Settings) > Phone Settings > Display Settings.
.
Changing Phone Settings
to decrease the brightness.
65