Invacare Storm4 X-plore User Manual page 58

• Adjust the armrest width.
The possible positions for the armrest are
predefined by the drill-holes in the torque
support and the armrest axel.
• Insert the locating pin.
• Retighten the screw.
• Repeat the procedure for the other armrest.
• Replace the backrest cover (2).
When doing so, ensure that the recesses in the
sides are located correctly.
• Retighten the bolts on both sides of the backrest
cover (1) again.
The photograph only shows the bolts on the left-
hand side.
58