Invacare Storm4 X-plore User Manual page 152

Repair the flat tyre
EXPLOSION HAZARD!
The wheel explodes if the air is not left out before dismantling!
• It is imperative that you let the air out of the tyre before dismantling it (press the pin in the
middle of the valve downwards)!
• Remove the valve cap.
• Let the air out of the tyre completely by pressing the pin in
the centre of the valve in.
• Remove the 5 Allen screws (1)
• Take the tyre and the inner tube off of the rim halves.
• Repair the inner tube and re-fit, or replace it with a new
one.
NOTE
In case the old inner tube is to be repaired and used again, and it happens to get wet during
repair, then it is easier to re-fit it if you powder it lightly with talcum powder.
152