Invacare Storm4 X-plore User Manual page 153

• Place the rim halves in the tyre from the outside.
• Pump up the tyre a little.
• Re-position the Allen screws in the rim and tighten them firmly. Make sure the inner tube does
not get pinched between the rims halves!
• Check to make sure that the tyre is squarely in place on the rim.
• Pump up the tyre to the recommended tyre pressure.
• Check to make sure that the tyre is still squarely and snugly in place on the rim.
• Screw the valve cap back on.
• Refit the wheel.
153