Table of Contents
Advertisement
3-4 Starting and Stopping Print
After printing has finished, open the cover and detach the material.
Do not open the cover until the operation is completely stopped.
If the material is difficult to detach when using the adhesive sheet, inserting a thin, flat object (such
as a piece of stiff paper or cardboard) between the adhesive sheet and the material may make it
easier to dislodge.
50
Chapter 3 Making Prints
Click the [Image Correction] tab.
Select [Material].
Select either the composition or the product
code of the material.
You can adjust and register the striking
force.
P. 88, "Registering a Composition and Adjusting
the Striking Force"
Select Print mode.
P. 88 "Registering a Composition and Adjusting
the Striking Force," METAZA Driver online help
([Correction] tab)
Click [OK].
Click [OK].
The printing data is sent to the machine and
printing starts.
Advertisement
Table of Contents
