Table of Contents
Advertisement
3-3 Preparing Print Data (METAZAStudio)
If the material has holes, take care to ensure that the image is not laid out over the holes. If you include the
holes in the printing area, the marking pins might hit the edge of the material, damaging it.
P. 55, "Adjusting the Location, Size, or Angle of an Image"
OK
Printing area
1mm ( 0.04 in. )
1mm ( 0.04 in. )
46
Chapter 3 Making Prints
Not OK
Not OK Not OK
Printing area
Printing area
No margins are
The printing area
present at the edges
lies over a hole.
of the material.
At [Look in], select the location
of the file.
At [Files of type], select either
[Picture file] or [Adobe Illustrator
file].
Select the file you want.
Click [Open].
The specified image is imported and dis-
played with the margins you set.
You can vary the arrangement of the placed
image, such as by changing its size or orien-
tation or by adding borders around it.
P. 54, "4-1 Tips and Tricks for Image Layout"
Printing area
The printing area
extends beyond
the material.
Advertisement
Table of Contents
