Ariens Contractor 996126 Operator's Manual page 29

Transfer Case
(See Figure 22)
(Four-Wheel Drive Units Only)
1
1. Transfer Case Oil Check and Fill Plug
2. Transfer Case Oil Drain Plug (Transfer case must be
removed from vehicle to access drain plug)
2
Figure 22
Front Differential Case
(4-Wheel Units Only)
1
1. Check and Fill Plug
2. Drain Plug
3. Breather Hose. Oil may be added here by removing hose.
Make sure check plug is open when adding oil. Always
reinstall breather hose when finished.
Brake Fluid (See Figure 24)
The master cylinder fluid reservoir is attached to the body
frame under the front hood on the driver's side. Visually
inspect fill line on the reservoir by turning the steering wheel
to the left and looking under the driver's side wheel well.
Remove cap and add DOT 3 fluid to the reservoir through
the wheel well with a squeeze bottle and tube inserted into
the reservoir. Fill to line on reservoir.
See SPECIFICATIONS on page 35.
1. Brake Master Cylinder Fluid Reservoir
GB - 29
(See Figure 23)
3
2
Figure 23
Figure 24
1